September 18, 2006
UC Santa Barbara and Intel Develop World’s First Hybrid Silicon Laser?
Chip that Emits and Guides Light Could Drive Silicon Photonics Into Wide Use in Future Computers and Data Centers
SANTA BARBARA, Calif., Sept. 18, 2006 – Researchers from the University of California, Santa Barbara (UCSB) and Intel Corporation have built the world’s first electrically powered Hybrid Silicon Laser using standard silicon manufacturing processes. This breakthrough addresses one of the last major barriers to producing low-cost, high-bandwidth silicon photonics devices for use inside and around future computers and data centers.
The researchers were able to combine the light-emitting properties of Indium Phosphide with the light-routing capabilities of silicon into a single hybrid chip. When voltage is applied, light generated in the Indium Phosphide enters the silicon waveguide to create a continuous laser beam that can be used to drive other silicon photonic devices. A laser based on silicon could drive wider use of photonics in computers because the cost can be greatly reduced by using high-volume silicon manufacturing techniques.
“This could bring low-cost, terabit-level optical ‘data pipes’ inside future computers and help make possible a new era of high-performance computing applications," said Mario Paniccia, director of Intel’s Photonics Technology Lab. "While still far from becoming a commercial product, we believe dozens, maybe even hundreds of hybrid silicon lasers could be integrated with other silicon photonic components onto a single silicon chip.”
"Our research program with Intel highlights how industry and academia can work together to advance the state of science and technology," said John Bowers, a professor of electrical and computer engineering at UC Santa Barbara. “By combining UCSB’s expertise with Indium Phosphide and Intel’s silicon photonics expertise, we have demonstrated a novel laser structure based on a bonding method that can be used at the wafer-, partial-wafer or die-level, and could be a solution for large-scale optical integration onto a silicon platform. This marks the beginning of highly integrated silicon photonic chips that can be mass produced at low cost.”
While widely used to mass produce affordable digital electronics today, silicon can also be used to route, detect, modulate and even amplify light, but not to effectively generate light. In contrast, Indium Phosphide-based lasers are commonly used today in telecommunications equipment. But the need to individually assemble and align them has made them too expensive to build in the high volumes and at the low costs needed by the PC industry.
The hybrid silicon laser involves a novel design employing Indium Phosphide-based material for light generation and amplification while using the silicon waveguide to contain and control the laser. The key to manufacturing the device is the use of a low-temperature, oxygen plasma -- an electrically charged oxygen gas -- to create a thin oxide layer (roughly 25 atoms thick) on the surfaces of both materials.
When heated and pressed together the oxide layer functions as a “glass-glue” fusing the two materials into a single chip. When voltage is applied, light generated in the Indium Phosphide-based material passes through the oxide “glass-glue” layer and into the silicon chip’s waveguide, where it is contained and controlled, creating a hybrid silicon laser. The design of the waveguide is critical to determining the performance and specific wavelength of the hybrid silicon laser. More information on the Hybrid Silicon Laser can be found at http://www.intel.com/research/platform/sp/hybridlaser.htm and http://www.ece.ucsb.edu/uoeg/.
Bowers has worked with Indium Phosphide-based materials and lasers for more than 25 years. Currently his research is focused on developing novel optoelectronic devices with data rates as high as 160Gb/s and techniques to bond dissimilar materials together to create new devices with improved performance.
The UCSB work was funded by the Microelectronics Technology Office of the Defense Advanced Research Projects Agency (DARPA) and Intel Corporation.
Jagdeep, Shah, PhD, program manager at DARPA in the Microsystems Technology Office, said, “Getting an electrically pumped laser source on silicon using fabrication process compatible with high volume manufacturing is a critical step forward towards low cost, high performance silicon photonic integrated circuits."
Engineering at UC Santa Barbara
Engineering at UC Santa Barbara is considered a leader in bioengineering, chemical and computational engineering, materials science, nanotechnology, optics and physics. UCSB has five faculty Nobel Laureates. The College of Engineering’s uniquely successful interdisciplinary and entrepreneurial approach to research and learning is central to these achievements.
Released by Barbara Bronson Gray
Media ContactTony Rairden